Between Magpower external drive electronics and venting valve, For all ATH-M and ATP-M series pumps except ATH 500 M, Cable length 10 m
Between Magpower external drive electronics and venting valve, For all ATH-M and ATP-M series pumps except ATH 500 M, Cable length 3.5 m
Between Magpower external drive electronics and venting valve, For all ATH-M and ATP-M series pumps except ATH 500 M, Cable length 5 m
G 1/8" connection, Valve is normally closed, For free assemblies
Cable for connection to TC 110/120 and TCP 350 included in the shipment, Venting mode, venting time and venting period adjustable via electronic drive unit and DCU/HPU, G 1/8" connection, Valve is normally closed, Can be directly connected with a M8 plug to the accessory outlets from the connection cable, TCS 12/13 as well as TC 110/120 with interface (PB, E74, RS)
Cable for connection to TC 400/1200, TCP 350 and TM 700 included in the shipment, Venting mode, venting time and venting period adjustable via electronic drive unit and DCU/HPU, Connection G 1/8", Valve is normally closed, Connects with M12 plug directly to accessory outputs of electronic drive unit
Venting mode, venting time and venting period adjustable via electronic drive unit and DCU/HPU, G 1/8" connection, Valve is normally closed, Connects directly to TC 400, TC 1200 and TM 700
For BA 251 | BA 501, Venting valve for inlet side, Mounted at dome, Customer benefit: Prevents reverse turn of pump after switching pump off
Connection for DN 250 CF-F, Suitable for HiPace 1500 and 2300, For the employment of turbopumps on systems and plants that are sensitive to vibration, The flow resistance should be taken into account at the design of the pumping system, Only vertical operation allowed, Note: Fastening of the pump see operating instructions, An additional pump mounting is required
Don't worry we won't leave you in a vacuum
